|
 |
|
Ratings
- 15.5, 27, and 38 kV voltage classes
- 600 or 200 Amp continuous and load break switching
- Standard 22.5 kA ASYM momentary and fault close
Optional 32/40 kA ASYM momentary and fault close, Styles
- 2, 3, 4, 5 or 6-way circuit configurations
- 600 Amp deadbreak or 200 Amp deepwell elbow connections
- Three phase or single phase
|
|
Standard Features
- All welded mild steel switch tank, factory assembled, tested, and filled with SF6.
- Removable operating handle with padlock provisions, position indicators, provision for operation by hookstick or rope, and handle storage.
- 200 Amp deepwell or 600 Amp bushings furnished with protective shipping caps and one ground lug per set of bushings.
- Phase identification tags, nameplate with ratings and connection diagram.
- Color-coded pressure gauge and brass fill valve.
- Lifting and mounting provisions.
- 12-gauge mild steel, tamper-resistant, single-side access padmount enclosure with 3-p latch double doors and hinge hood. Equipped with stainless steel hardware, wind stops, padlock provision and pentahead bolt. Enclosure painted dark green.
|
|
|
|
Three Phase and Single Phase Single Side Access Padmount Switches
|
| Switch Configuration |
3-Phase Catalog Number |
1-Phase Catalog Number |
Model Number Replace "X" with "2" for 200 A Bushing 6" for 600 A Bushing |
Max kV |
Width* Dim. Inches |
Wt.*
Lbs. approx. |
Down- load Spec |
Down- load Drawing |
2 WAY - 1 SWITCHED
 |
PG6-21-15 |
PG61-21-15 |
x x |
15.5 |
|
|
 |
|
| PG6-21-27 |
PG61-21-27 |
x x |
27 |
41 |
700 |
| PG6-21-38 |
PG61-21-38 |
x x |
38 |
|
|
3 WAY - 2 SWITCHED
 |
PG6-32-15 |
PG61-32-15 |
x x x |
15.5 |
|
|
|
|
| PG6-32-27 |
PG61-32-27 |
x x x |
27 |
53 |
1100 |
| PG6-32-38 |
PG61-32-38 |
x x x |
38 |
|
|
3 WAY - 3 SWITCHED
 |
PG6-33-15 |
PG61-33-15 |
x x x |
15.5 |
|
|
|
|
| PG6-33-27 |
PG61-33-27 |
x x x |
27 |
53 |
1200 |
| PG6-33-38 |
PG61-33-38 |
x x x |
38 |
|
|
4 WAY - 2 SWITCHED
 |
PG6-42-15 |
PG61-42-15 |
x x x x |
15.5 |
|
|
|
|
| PG6-42-27 |
PG61-42-27 |
x x x x |
27 |
65 |
1400 |
| PG6-42-38 |
PG61-42-38 |
x x x x |
38 |
|
|
4 WAY - 4 SWITCHED
 |
PG6-44-15 |
PG61-44-15 |
x x x x |
15.5 |
|
|
|
|
| PG6-44-27 |
PG61-44-27 |
x x x x |
27 |
65 |
1600 |
| PG6-44-38 |
PG61-44-38 |
x x x x |
38 |
|
|
5 WAY - 5 SWITCHED
 |
PG6-55-15 |
PG61-55-15 |
x x x x x |
15.5 |
|
|
|
|
| PG6-55-27 |
PG61-55-27 |
x x x x x |
27 |
91 |
1700 |
| PG6-55-38 |
PG61-55-38 |
x x x x x |
38 |
|
|
6 WAY - 6 SWITCHED
 |
PG6-66-15 |
|
x x x x x x |
15.5 |
|
|
|
|
| PG6-66-27 |
|
x x x x x x |
27 |
108 |
2000 |
| PG6-66-38 |
|
x x x x x x |
38 |
|
|
Width and Weight shown is for 3 phase switches.
For 1 phase switches: Width 41" for all units and Weight is as follows: 2 way = 300 lbs.; 3 way = 400 lbs.; 4 way = 500 lbs.
To specify optional 32/40kA ASYM rating add /32/40 to catalog number. Example: PG6-21-15/32.
|
|
PufferPak LPG low profile padmount switches are designed and constructed per ANSI standard C37.72. Bushings, parking stands and operating handles are located to allow hookstick operation.
Three and four-way switches incorporate double-sided access to the operating compartments. Units are 40" high x 72" wide x 84" deep.
|
|
Standard PufferPak subsurface switches may be adapted for use in padmount applications by specifying an Optional Padmount Enclosure. The enclosure will house any of the subsurface switches shown on this web site. The result is an attractive, tamper-resistant padmount switch with plenty of room for installation, operation and cable training.
|
|
|
LPG Low Profile Padmount Switches
|
| Switch Configuration |
3-Phase Catalog Number |
Model Number Replace "x" with "2" for
200 A Bushing 6" for 600 A Bushing |
Max kV |
Wt.* Lbs. approx. |
3 WAY - 3 SWITCHED
|
LPG6-33-15 |
x x x |
15.5 |
|
| LPG6-33-27 |
x x x |
27 |
1400 |
| LPG6-33-38 |
x x x |
38 |
|
4 WAY - 4 SWITCHED
|
LPG6-44-15 |
x x x x |
15.5 |
|
| LPG6-44-27 |
x x x x |
27 |
1600 |
| LPG6-44-38 |
x x x x |
38 |
|
Note: 32/40 kA ASMY rating not available on LPG switches.
|
|
PufferPak padmount switches feature deadfront, compact, sealed, corrosion-resistant construction and low profile, tamper-resistant enclosures. Switch components are contained in a welded, steel tank factory-filled with SF6. Maintenance is minimized since performance is unaffected by contamination, rodents and flooding.
Padmount enclosures are removable for easy installation and maintenance. Switch accessories, operating handles, and elbow connections are located for ease of operation and cable training with access through hinged doors and hood.
|
|
Padmount switches are furnished with manual operators and standard accessories for normal installation. Units are available with single-side access for limited space application or double-side access with separate compartments for incoming and outgoing circuits.
Popular options include: remote or automatic switching; visible break; operational interlocks; and parking stands.
|
|
|
|
|
